+86 15753219207
  QINGDAO-ANTAI

Locomotive Vehicle Blasting Machine



  • Locomotive vehicle shot blasting clean machine
Locomotive vehicle shot blasting clean machine

Locomotive vehicle shot blasting clean machine

  • Model】:
  • Application】:
  • Characteristics】:


Product Description
Sand/Shot Blasting Room



Sand blasting room is mainly used for sand/shot blasting and derusting of carbody, bogie and underframe of railway rolling stock. This kind of sand blasting room adopts the technology of reinforced honeycomb sand sucking floor, it is no need to use the bucket elevator, belt-conveyer or mechanical operation parts during the circulation of abrasive materials. It can reach low wear, less technical fault, less operation failure and reduced maintenance work by using honeycomb sand sucking system.

Outstanding characteristics:

1) Saving construction cost without constructing deep pits;

2) Reducing the operation failures without mechanical devices such as winch, bucket elevator, belt conveyer, etc.

3) Easy maintenance of equipment; and low maintenance cost

4) Integrally designed sand sucking floor can recover all the sand at once, and no sand remaining on the floor. It is easy to keep the sand blasting cabin clean and can reduce manual cleaning work and so can save lots of working time.

5) Good working conditions in the cabin: bright lighting, comfortable, good visibility, low dust content. It improves the working condition and protects the health of workers at maximum.

6) Advanced technical performance of the whole sand blasting cabin is proved good enough to ensure the ash and dust exhausted meet and lower than the requirement of National environmental protection, and avoid of environmental pollution.

1

Working dimension of sand blasting Cabin

30000*6500*7000mm

2

Type of main door

Electric Roll-up Door

3

Operation of door

Electric or Manual Operation

4

Dimension of main doors

4.5m*5.5m

5

Material of Roll-up Door

Anti-wear rubber

6

Nos. of main unit ofsand blasting machine

2 pcs

7

Dia. of sand blasting tank

900mm

8

Volume of sand blasting tank

1m3

9

Nos. of spray gun of sand blasting machine

2 guns/each sand blasting machine

10

Dia. of nozzle:

9-12mm

11

Max. cleaning speed of single gun

15-25m2/h

(Working pressure: 0.6Mpa)

12

Pressure of compressed air

0.5-0.8MPa

13

Volume of gas consumption:

30m3/min

(4 guns working simultaneously)

14

Sand storage container

1 set

15

Volume of sand storage container

4m3

16

Power of electric heater

250w

17

Nos. of electric heater

8 pcs

18

Grain size of sand

G25-G50Dia.0.2-1mm

19

Initial input weight

12000kg


Our Service

1.Equipment painting completed before shipment, With Stretch film to avoid rub off the surface paint, It can used wooden cases packaging according to users requirements.(Key parts such as electric cabinet with shockproof packaging material and then packed in wooden cases. )

2. We have 15 experienced engineers, With 108 skilled workers insure good quality of our machines and prompt delivery.
3.Meanwhile our company has a long-term cooperation with ACL, CSCL, CCNI, CNC, COSCO etc insure the goods to the port on time.

Our Company
1.All design adopt Solidworks(3D Design). The first company in Qingdao adopts all three dimensional design.
2.All adopt general parts, easy to buy and replace.
3.International certification: CE,ISO14001,ISO9001,TUV,BV.
4.Domestic certificate:AAA corporate certificate(The first AAA enterprise in Qingdao);
5.Issued by Qingdao Municipality:Certificate of High and New Technology Enprise;
6.Issued by Qingdao Municipality: Certificate of Confidence and Trustworthiness;(There has never been a legal dispute.
Packing & Delivery

1.Equipment painting completed before shipment, With Stretch film to avoid rub off the surface paint, It can used wooden cases packaging according to users requirements.(Key parts such as electric cabinet with shockproof packaging material and then packed in wooden cases. )
2. We have 15 experienced engineers, With 108 skilled workers insure good quality of our machines and prompt delivery.
3.Meanwhile our company has a long-term cooperation with ACL, CSCL, CCNI, CNC, COSCO etc insure the goods to the port on time.

FAQ
If the machine is not suitable for your workpiece, please tell us the following infromation:

1)     What kind of workpiece will you clean?
2)    The size of workpieces(length, width and height of maximum  workpiece,Length, width and      height of minimum workpiece?)
3)     How many  the weight of maximum and minimum workpiece?
4)     Please tell us your requirement cleaning efficiency?

According to your infomation, the most suitable machines will be designed for your workpieces.



Contact Us

Tel: +86-532-88138566
Mobile(Whatsapp): +86-15753219207
Wechat: QINGDAO-ANTAI
E-mail: Lan.ji@qdantai.com