What kind of working environment does the shot blasting machine need?

Many devices need to meet certain conditions when they are running, and they can work smoothly under certain circumstances. Then what is the working environment of such a shot blasting machine and what conditions are required to run it? Let's take a look here.
    I. Working conditions
1. The degree of unevenness of the working surface required by the equipment must be less than twenty millimeters. There must be no water on the working surface. It must be relatively dry. The slope of the working surface must be less than 25 degrees.
2. The temperature range in which the environment in which the equipment works should be between minus 20 degrees Celsius and 60 degrees Celsius, and the temperature of the surface of the workpiece such as steel plates to be processed must be above 3 degrees Celsius.
3. In the environment where the equipment works, there are two aspects to ensure the humidity. One is to blast the surface of the steel workpiece. The humidity must be less than 90%. The other is to blast the concrete workpiece. Make sure that the relative humidity is not more than 95%.
4. The altitude required for operation is in the range of zero meters to three kilometers. Shot blasting is strictly prohibited in rainy and snowy days.
   Work efficiency
1. When the shot blasting machine is operated on the surface of cement, its efficiency is generally 200 to 400 square meters per hour.
2. When the equipment is operated on the surface of the steel plate, it will have different efficiency depending on the grade of the steel plate. If the grade of the steel plate is SA2.5, the processing speed is four meters per minute, and when the grade is SA3, the speed is every Three meters in minutes.
   Third, the operating procedures
1. Equipment operators must undergo strict pre-job training and be very familiar with the performance characteristics of the equipment.
2. The operator of the equipment must be familiar with the manual of the machine and be familiar with the procedures before operating the equipment.
3. Before starting up, the operator should check the various switches of the equipment to avoid damage caused by misoperation.
4. If it is not the operator of this machine, it is generally forbidden to operate this machine at will, and ensure that it is not as close as possible.
5. Before operating the equipment, the operator should wear protective work clothes and protective glasses.
6. Pay special attention to the various instructions on the panel when turning on the machine. When the instructions are at normal values, you can start the normal procedure of operation and work. When the indication value on the meter has a large error, you should shut down and check.
7. During the operation of the equipment, always pay attention to whether the equipment is overheated or makes abnormal noises. If a serious fault is found, you should immediately press the emergency stop button, and restart the operation after troubleshooting.
In summary, when using such equipment as a shot blasting machine, it is necessary to provide the necessary working environment. Operators should also meet various conditions during operation. They must carry out production in a civilized manner and strictly implement the transfer of work to ensure that the production Done successfully.