Common problems and solutions of hook shot blasting machine

Common problems and solutions of hook shot blasting machine
Problem one: the shot blaster has an unusual sound.
solution:
1. The blade of the pill device is severely worn, resulting in unbalanced operation-please replace the blade in time.
2. If the impeller of the shot blaster is severely damaged by friction, please replace the impeller body in time.
3. What should I do if the bearing burns out? Just renew it and add grease!
Problem 2: The shot blasting machine always encounters the problem of poor cleaning effect.
solution:
1. The shot direction of the shot blaster can be wrong. At this time, the direction of the shot blaster needs to be adjusted accurately.
2. It may be that the shots of the shot blasting machine have been used for a long time or have been agglomerated, then we need to renew the shots.
3. The number of projectiles is not enough, please replenish it in moderation.
4. The pellet size is not suitable for the shot blasting machine. At this time, a proper pellet should be selected again.
Question 3: The problem of bucket elevators not working often is encountered.
solution:
1. For the belt slip, we need to adjust the tensioning device of the transmission wheel of the shot blaster to tighten the belt.
2. There may be too many shots at the bottom of the hoist of the shot blasting machine. We should stop and clean up the shots in a certain order.
3. It may be stuck by the pellets with large particles at the bottom of the elevator, then we only need to remove the pellets with large particles at the bottom of the elevator.