QPW50 LPG gas cylinder cleaning shot blasting machine

Equipment working principles and working procedures

When the shot blasting machine begins to work, the dust removing system,   separator, elevator, and roller system will run according to the correct sequence, then starts the blasting wheel, and the whole machine are ready to work. Load the workpieces on the charging conveyor outside blasting chamber, the workpiece will go ahead along with the conveyor, and then arrives at the blasting chamber, There is photoelectricity test device before entrance of shot blasting chamber. It will test when the head of workpiece pass the photoelectricity test device. Then supplying shot gate will open automatically, it will begin blasting workpieces. When the workpieces enter into discharging roller, it will be completely cleaning. It will offload the workpieces on the discharging roller after it completely leaves shot blasting chamber. It will repeat the work until the work is finished.

Working process

1. opening dust removing system

2. opening separator

3. opening elevator

4. opening conveyor system

5. opening blasting wheel

6. loading workpieces on the charging roller

7. it will use photoelectricity switch for testing head of workpieces, then opening shot gate

8. supplying shot gate is opened, the cleaning work begins

9. it will use photoelectricity switch for testing foot of workpieces, supplying shot gate is opened.

10. offloading workpieces on the discharging roller

11. repeating 6,7,8,9,10 operating process

12. if you want to stop working, please stop the devices according to step 13

13. stopping blasting wheel- elevator-separator-dust collector-roller, the whole shot blasting machine stop working.

Main technical parameters

1.We can design and produce for our customer according to the cleaning requirements of workpiece.

2.Our machine advantages:advanced design, reasonable structure ,low-power consumption and perfect efficiency.

3.Our main market : worldwide,South-east,Middle-east ,Europe and South America.

4.Our shot blasting spare parts are high quality.Blaster can reach uttermost long-life , environmental protection, high efficiency in service. The material, durability:

1.Equipment painting completed before shipment, With Stretch film to avoid rub off the surface paint, It can used wooden cases packaging according to users requirements.(Key parts such as electric cabinet with shockproof packaging material and then packed in wooden cases. )

2. We have 15 experienced engineers, With 108 skilled workers insure good quality of our machines and prompt delivery.
3.Meanwhile our company has a long-term cooperation with ACL, CSCL, CCNI, CNC, COSCO etc insure the goods to the port on time.

If the machine is not suitable for your workpiece, please tell us the following infromation:

1)     What kind of workpiece will you clean?
2)    The size of workpieces(length, width and height of maximum  workpiece,Length, width and      height of minimum workpiece?)
3)     How many  the weight of maximum and minimum workpiece?
4)     Please tell us your requirement cleaning efficiency?

According to your infomation, the most suitable machines will be designed for your workpieces.